A fresh round of HVAC price hikes of up to 25% went into effect from August 1 to 3, 2026, following the price adjustments in July. The latest price hike comes amid a broader cost squeeze on the HVAC industry, including tariffs on imported components and metals, elevated material costs, and the ongoing transition to A2L refrigerant.
Major brands, including Amana, Daikin, and Goodman, announced an increase of up to 7%, while other suppliers implemented larger increases on specific parts and product categories.
HVAC Manufacturers Raise Prices by Up to 25% From August 1-3
The latest price adjustments varied significantly by manufacturer and product category. See the table below:
| Manufacturer/Product Category | Price Increase (In Percentage) | Effective Date |
|---|---|---|
| Legend Valve | 3%-25% | August 1, 2026 |
| Uni-Product | 9% | August 1, 2026 |
| Eaton B-Line | 4.5%-10% | August 2, 2026 |
| Amana PTAC | 5% | August 1, 2026 |
| Goodman | 5%-7% | August 3, 2026 |
| Daikin | 5%-7% | August 3, 2026 |
Source: ACHR HVAC Price Increase List: August 2026
Other manufacturers, including Bard Manufacturing, Art's Sheet Metal, Tekmar, and Metal-Fab, also announced price increases of roughly 5-7%. The size of the manufacturer increase also varied by product. For example, AprilAire announced adjustments ranging from 0-4%, while RectorSeal did only a 3% increase.
HVAC Price Increases Were 10% in July 2026
According to ACHR news, this is not the first wave of price increases this year. July already brought a broad set of manufacturer increases, with six suppliers adding product-specific adjustments of up to 10%. Tutco and Jones Stephens topped the chart with 10% across their product portfolios, including PEX products, while most global suppliers, such as Fujitsu, Duravent Group, and JB Industries, kept the increases between 6% and 8%.
The increases affected a broad range of HVACR products and components, including:
- Equipment
- Coils
- Motors
- Flex duct
- Valves
- Controls
- Insulation
- Pumps
- Filtration products
- Accessories
Consequently, the August price hike is not a single event; it follows a broader pricing trend that was already visible throughout the year.
August Price Increases Will Continue Throughout the Month
The pricing adjustments are also continuing beyond the first week of August. Lau is scheduled to increase prices on parts by 16.2%-16.8%, effective August 31, 2026.
The range of increases across August shows that the pricing pressure is not uniform across the HVACR industry. Some suppliers have announced modest adjustments, while certain parts and products are seeing substantially larger margins.
Multiple Cost Pressures Are Driving HVAC Price Increases in 2026
The pricing pressure is not limited to HVAC systems only. It is affecting different parts of the supply chain, including labor, materials, transportation, and operational costs. Several overlapping factors are contributing to price increases this year.
New 10%-12.5% Tariffs Add Pressure to HVAC Equipment Costs
Tariffs are adding another layer of cost pressure to the HVAC supply chain.
ACHR News reported that new Section 301 tariffs of 10-12.5% were imposed on imports from 60 different countries. These tariffs increased the cost of imported HVAC equipment and components. Moreover, after the Supreme Court struck down the old tariffs in early 2026, the US Trade Representative pursued a different legal path, bringing fresh tariff-related costs for imported HVAC equipment and components.
These impositions further add pricing pressure that is already affecting manufacturers and suppliers.
A2L Refrigerant Transition Under EPA AIM Act Adds New HVAC Requirements
According to EPA AIM Act implementation guidance, the industry's transition to lower-GWP A2L refrigerants is another factor affecting equipment design and installation. Systems using refrigerants such as R-454B require manufacturers to adapt equipment and incorporate safety-related components and controls.
The transition also affects contractors, who need updated tools, procedures, and training to install and service A2L equipment safely.
Read more: Why AC Repairs Cost More in 2026: The R-410A Refrigerant Shortage
These changes add engineering, manufacturing, and installation considerations that can contribute to higher HVAC equipment and replacement costs.
PPI for Aluminum Mill Shapes Rose About 39%
Raw material costs are adding another layer of pressure. Industry reports indicate that aluminum mill shapes have surged by 39%, while steel is up 21% and copper and brass prices have climbed more than 15% over the past year; material costs across residential and commercial markets are expected to remain elevated in 2026.
HVAC manufacturers continue to rely heavily on core materials such as copper, steel, aluminum, and electronic components. These inputs are used across nearly every part of an HVAC system, including coils, refrigerant lines, cabinets, motors, controls, and other essential components.
When the cost of these materials rises, manufacturers typically respond by adjusting pricing or passing some of the added cost through the supply chain. These price absorptions show up in the repeated cost adjustments across HVACR products in July and August.
HVAC Labor Costs Climb Amid Ongoing Wage Pressure
Manufacturer pricing is only one part of the total cost equation. Contractors are also facing higher expenses tied to labor, transportation, training, and day-to-day operations.
This is important because the final price a homeowner pays includes far more than the equipment itself. A typical installation may also involve labor, electrical modifications, permits, refrigerant-related requirements, removal of the existing system, and other site-specific work.
What Do the 2026 HVAC Price Increases Mean for Homeowners
A manufacturer price increase does not automatically translate into the same percentage increase in a homeowner's replacement quote. Those considering an HVAC replacement should pay attention to the equipment's pricing and ordering timeline.
Depending on the manufacturer's pricing policies, equipment ordered before a price increase may still qualify for earlier pricing.
Before accepting a quote, ask:
- Does this quote reflect the most recent manufacturer pricing?
- Which equipment and model are included?
- How long is the quoted price valid?
- When will the equipment be ordered?
- Can the equipment price be locked in?
- Are A2L-related components and installation requirements included?
- Are permits, electrical work, and other installation costs included?
For homeowners who already need a replacement, requesting quotes sooner can help you better understand current pricing before additional manufacturer adjustments take effect.
Compare HVAC Quotes Before the Next Replacement
With equipment, labor, and installation costs all affecting the final price, comparing detailed quotes can help homeowners understand what they are actually paying for. Compare quotes from local HVAC contractors and look beyond the equipment price to evaluate installation, required upgrades, labor, and other project costs.
